Printers by Rick Broida Oct 16, In many cases, the delivery rollers upper and lower in the upper or final stage of the paper exit are worn or unserviceable. Best headphone deals for Christmas: Menu items to user-selected settings and erase buffered page data, temporary soft fonts and temporary macros. Static Dissipater – Static dissipater – Located underneath main top cover. Foot – Right foot assembly – For the bottom of the printer. The engine over all is reliable.

Uploader: Sataxe
Date Added: 4 August 2012
File Size: 56.59 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 52177
Price: Free* [*Free Regsitration Required]

The error accumulates with each page printed, and eventually the paper is entering the mechanism so late that the printer believes that a jam has occurred. There are a couple of solenoids at the paper tray input mechanism that have felt pads designed to cushion them when they snap on, and the glue holding these pads in place can ho to the surface.

HP LaserJet 4mv – printer – monochrome – laser Overview – CNET

Repeat this process for freeing the corresponding metal bar on the other side of the fuser. If the SIMM device has more than one bank of memory, the good banks will be configured. Hardware – Thumbscrew – Attaches panel to main logic Formatter board. Optional Sheet Lower Cassette. Cover – Left side cover – Has vent for exhaust fan. Make sure you SIMM board is installed correctly.

Last Drivers  INTEL GLE960 GME965 DRIVER

Module – External token ring interface module – Has DB-9 connector. However the driver for the HP LaserJet 4 exists in most, even older, software products and bp a popular substitute driver for other PCL compatible printers. Remove the page from the output bin and press Continue. An accessory cartridge was inserted while the printer was in an error state.

Be respectful, keep it civil and stay on topic. The printer received more data form the hpp than can fit in its available user memory. Overlay – Control panel overlay Simplified Chinese.

Label – LaserJet printer labels for 5. This can be repaired by replacement of the front fuser door.

HP LaserJet 4

Static Dissipater – Static dissipater – Located behind separation pad. Because the printer uses the MP tray as both a manual feed tray and a paper cassette, manual feed works differently than for earlier LaserJets. If the error appears again, call your dealer or HP service representative. System Requirements OS Required. A feature of the 4Si particularly dear to graphic designers was the straight paper feed. SIMM Slot 1 2: If this error persists, call your HP-authorized service provider.

Lever – Sensor lever – For Photosensor on front cover connect board. Ship it back in the box we sent if you still have it.


Pin – Front door Right side hinge pin – Transparent in color. Load the correct envelope size into the feeder, or press Continue to use the size of media installed in the feeder. X refers to the device the printer was checking when it encountered the error. If the error is still present switch the 4mb off and remove the SIMM board, Switch the printer back on.

The engine bp a high monthly duty cycle 20, pages and it is not uncommon to find units still functioning well after a million or more page impressions. To install the replacement fuser you will again have to flex the panels and allow the metal bar to drop and catch in its appropriate slots on each side. 4jv – Cable – From control panel to interface board. Discussion threads can be closed at any time at our discretion.

The HP Tango X writes the book on bookshelf printers.

Continue will not clear the display.